Cart ( 0 ) Register Login

Webstore





RS ISO 6507-1: 2023
Metallic materials — Vickers hardness test — Part 1: Test method
Abstract

This document specifies the Vickers hardness test method for the three different ranges of test force for
metallic materials including hardmetals and other cemented carbides (see Table 1).
Table 1 — Ranges of test force
Ranges of test force, F
N
Hardness symbol Designation
F ? 49,03 ?HV 5 Vickers hardness test
1,961 ? F < 49,03 HV 0,2 to 0,009 807 ? F < 1,961 HV 0,001 to The Vickers hardness test is specified in this document for lengths of indentation diagonals between
0,020 mm and 1,400 mm. Using this method to determine Vickers hardness from smaller indentations
is outside the scope of this document as results would suffer from large uncertainties due to the
limitations of optical measurement and imperfections in tip geometry.
A periodic verification method is specified for routine checking of the testing machine in service by
the user.
For specific materials and/or products, particular International Standards exist.

General Information

CodeClassificationThemePagesPublisherAvailability
RS ISO 6507-1: 2023ADOPTED ISO STANDARDSMetallurgy39Fifth Edition
Dec 2024		Available
Price: RWF 45,000


View: All

View by: Classification

View by: Group
Agriculture ( 260 )
Metallurgy ( 131 )
Services ( 8 )
Testing ( 5 )
Rwanda Standards Board

© Rwanda Standards Board 2020  - All rights reserved

KK 15 Rd, 49; PO Box: 7099 Kigali-Kicukiro, Tel: +250 0788303492, Hotline: 3250, Email:info@rsb.gov.rw