Cart ( 0 ) Register Login

Webstore





RS ISO 12917-1: 2002
Petroleum and liquid petroleum products — Calibration of horizontal cylindrical tanks — Part 1: Manual methods
Abstract

This part of ISO 12917 specifies manual methods for the calibration of nominally horizontal cylindrical tanks,
installed at a fixed location. It is applicable to horizontal tanks up to 4 m in diameter and 30 m in length.
The methods are applicable to insulated and non-insulated tanks, either when they are above-ground or underground. The methods are applicable to pressurized tanks, and to both knuckle-dish-end and flat-end cylindrical tanks as well as elliptical and spherical head tanks.
This part of ISO 12917 is applicable to tanks inclined by up to 10 % from the horizontal provided a correction is applied for the measured tilt.
For tanks over and above these dimensions and angle of tilt, appropriate corrections for tilt and appropriate volume computations should be based on the “Coats” equation [1].

General Information

CodeClassificationThemePagesPublisherAvailability
RS ISO 12917-1: 2002ADOPTED ISO STANDARDSMetrology and measurement. Physical phenomena55Fifth Edition
Apr 2016		Available
Price: RWF 69,000


View: All

View by: Classification

View by: Group
Agriculture ( 262 )
Metallurgy ( 114 )
Services ( 8 )
Testing ( 5 )
Rwanda Standards Board

© Rwanda Standards Board 2020  - All rights reserved

KK 15 Rd, 49; PO Box: 7099 Kigali-Kicukiro, Tel: +250 0788303492, Hotline: 3250, Email:info@rsb.gov.rw