Webstore

RS ISO 17289: 2014
Water quality — Determination of dissolved oxygen — Optical sensor method

Abstract

This International Standard specifies an optical method for the determination of dissolved oxygen in
water using a sensor working on the basis of fluorescence quenching.
Measurement can be made either as a concentration of oxygen in milligrams per litre, percentage
saturation (% dissolved oxygen), or both. Depending on the instrument used, detection limits of
0,1 mg/l or 0,2 mg/l can be reached according to the manufacturer’s manual. Most instruments permit
measurement of values higher than 100 %, i.e. supersaturation.
NOTE Supersaturation is possible when the partial pressure of oxygen is higher than in air. Especially in case
of strong algae growth, supersaturation up to 200 % and more is possible.
If waters with a saturation higher than 100 % are measured, it is essential to make arrangements to
prevent the outgassing of oxygen during the handling and measurement of the sample. Similarly, it is
important that the transport of oxygen into the sample is prevented if the saturation is below 100 %.
The method is suitable for measurements made in the field and for continuous monitoring of dissolved
oxygen as well as measurements made in the laboratory. It is one of the preferred methods for highly
coloured and turbid waters, and also for analysis of waters not suitable for the Winkler titration method
because of iron- and iodine-fixing substances, which can interfere in the iodometric method specified
in ISO 5813.
The method is suitable for drinking waters, natural waters, waste waters, and saline waters. If used
for saline waters such as sea or estuarine waters, a correction for salinity is essential for concentration
measurement of oxygen.

General Information

Code	Classification	Theme	Pages	Publisher	Availability
RS ISO 17289: 2014	ADOPTED ISO STANDARDS	Environment. Health protection. Safety	21	First Edition Sep 2024	Available