| | ITEM | EACH | QTY | SUB-TOTAL | |
| 1 | Rwanda Standards | RS ISO 23671: 2021
TYRES — METHOD FOR MEASURING RELATIVE WET GRIP PERFORMANCE — LOADED NEW TYRES; PASSENGER CAR | 33,000.00 | 1 | 33,000.00 | |
| 2 | Rwanda Standards | RS ISO 16121-4: 2011
ROAD VEHICLES — ERGONOMIC REQUIREMENTS FOR THE DRIVERS WORKPLACE IN LINE-SERVICE BUSES — PART 4: CABIN ENVIRONMENT | 9,000.00 | 1 | 9,000.00 | |
| 3 | Rwanda Standards | RS 191: 2019
REFINED PYRETHRUM CONCENTRATE ? SPECIFICATION | 33,000.00 | 1 | 33,000.00 | |
| 4 | Rwanda Standards | RS ISO 9227: 2017
CORROSION TESTS IN ARTIFICIAL ATMOSPHERES — SALT SPRAY TESTS | 27,000.00 | 1 | 27,000.00 | |
| 5 | Rwanda Standards | RS 229: 2020
POST HARVEST AND STORAGE FOR SOYBEAN — GUIDELINES | 12,000.00 | 1 | 12,000.00 | |
| 6 | Rwanda Standards | RS ISO 534: 2011
PAPER AND BOARD — DETERMINATION OF THICKNESS, DENSITY AND SPECIFIC VOLUME | 19,500.00 | 1 | 19,500.00 | |
| 7 | Rwanda Standards | RS ISO 10454: 1993
TRUCK AND BUS TYRES — VERIFYING TYRE CAPABILITIES — LABORATORY TEST METHODS | 10,500.00 | 1 | 10,500.00 | |
| 8 | Rwanda Standards | RS ISO 14960-2: 2014
TYRES — VALVES AND COMPONENTS — PART 2: CLAMP IN-TUBELESS TYRE VALVE — TEST METHODS | 10,500.00 | 1 | 10,500.00 | |
| 9 | Rwanda Standards | RS ISO 5751-2: 2010
MOTORCYCLE TYRES AND RIMS (METRIC SERIES) — PART 2: TYRE DIMENSIONS AND LOAD-CARRYING
CAPACITIES | 51,000.00 | 1 | 51,000.00 | |
| 10 | Rwanda Standards | RS ISO 48-4: 2018
RUBBER, VULCANIZED OR THERMOPLASTIC — DETERMINATION OF HARDNESS — PART 4: INDENTATION HARDNESS BY DUROMETER METHOD (SHORE HARDNESS) | 22,500.00 | 1 | 22,500.00 | |
| 11 | Rwanda Standards | RS 91: 2021
LABELLING AND MARKING OF PHARMACEUTICAL PRODUCTS — SPECIFICATION | 7,500.00 | 1 | 7,500.00 | |
| 12 | Rwanda Standards | RS EAS 410: 2021
HOT-DIP ALUMINIUM-ZINC COATED PLAIN AND
CORRUGATED STEEL SHEETS — SPECIFICATION | 16,500.00 | 1 | 16,500.00 | |
| 13 | Rwanda Standards | RS ISO/PAS 11154: 2006
ROAD VEHICLES — ROOF LOAD CARRIERS | 126,000.00 | 1 | 126,000.00 | |
| 14 | Rwanda Standards | RS ISO 48-5: 2018
RUBBER, VULCANIZED OR THERMOPLASTIC — DETERMINATION OF HARDNESS — PART 5: INDENTATION HARDNESS BY IRHD POCKET METER METHOD | 7,500.00 | 1 | 7,500.00 | |
| 15 | Rwanda Standards | RS ISO 3877-4: 1984
TYRES, VALVES AND TUBES — LIST OF EQUIVALENT TERMS — PART 4: SOLID TYRES | 7,500.00 | 1 | 7,500.00 | |
| Total | RWF 393,000.00 | |
