| | ITEM | EACH | QTY | SUB-TOTAL | |
| 1 | Rwanda Standards | RS 113: 2021
GEOTECHNICAL DESIGN — GENERAL
REQUIREMENTS | 20,500.00 | 100 | 2,050,000.00 | |
| 2 | Rwanda Standards | RS ISO 17660-2: 2006
WELDING — WELDING OF REINFORCING STEEL —
PART 2: NON LOAD-BEARING WELDED JOINTS | 24,000.00 | 102 | 2,448,000.00 | |
| 3 | Rwanda Standards | RS ISO/IEEE 11073-10415: 2022
HEALTH INFORMATICS — DEVICE INTEROPERABILITY
— PART 10415: PERSONAL HEALTH DEVICE
COMMUNICATION — DEVICE SPECIALIZATION | 70,500.00 | 46 | 3,243,000.00 | |
| 4 | Rwanda Standards | HAZARD ANALYSIS CRITICAL CONTROL POINT
(HACCP) SYSTEM — REQUIREMENTS | 25,500.00 | 50 | 1,275,000.00 | |
| 5 | Rwanda Standards | RS ASTM D1754/D1754M − 20
STANDARD TEST METHOD FOR EFFECTS OF HEAT AND AIR ON ASPHALTIC MATERIALS (THIN-FILM OVEN TEST)1 | 10,500.00 | 102 | 1,071,000.00 | |
| 6 | Rwanda Standards | RS ISO 17699: 2003
FOOTWEAR — TEST METHODS FOR UPPERS AND
LINING — WATER VAPOUR PERMEABILITY AND
ABSORPTION | 13,500.00 | 92 | 1,242,000.00 | |
| 7 | Rwanda Standards | RS ISO 14816: 2005
ROAD TRANSPORT AND TRAFFIC TELEMATICS — AUTOMATIC VEHICLE AND EQUIPMENT IDENTIFICATION — NUMBERING AND DATA STRUCTURE | 52,500.00 | 102 | 5,355,000.00 | |
| 8 | Rwanda Standards | RS ISO 9261: 2004
AGRICULTURAL IRRIGATION EQUIPMENT — EMITTERS AND EMITTING PIPE — SPECIFICATION
AND TEST METHODS AND TEST METHODS | 24,000.00 | 87 | 2,088,000.00 | |
| Total | RWF 18,772,000.00 | |
